Tuesday 13 May 2008
Buy Online With Confidence
Buy Online - Verified by Visa
Buy Online - MasterCard SecureCode

SL130T Data logger - Signatrol UK

SL130T
High Temperature Data Logger
View Previous Data LoggerView Next Data Logger
The SL130T temperature data logger provides an accurate, easy method of recording temperatures in harsh environments like washing machines, dishwashers, autoclaves, sterilizers or any application where the data logger is submersed in liquid. The SL130T is ideally suited for independent washer validation required under the HTM 2030 guidelines. The SL130T is housed in a robust PTFE enclosure and is fully potted to ensure no moisture ingress.
Removeable End Cap
The SL130T has a fast response probe protected by the PTFE case. Sample rates as low as once every two seconds are possible and the SL130T will store over 8000 readings with a typical battery life of 5 years. As the SL130T is fully encapsulated, there are no communication plugs and sockets. The data logger communicates with the computer via infra red. The end cap is removed from the data logger and it is placed on the SL120R infra red reader. The data can then be downloaded, viewed and the data logger reset ready for the next logging session.
 

The SL130T is designed to operate at temperature in excess of +85°C for a limited time only. The graph opposite shows an approximate time versus temperature exposure from +85°C to +140°C. You can see the SL130T is ok for 40 minutes at 90°C in stirred liquid and 60 minutes in still air. This reduces to 10 minutes in stirred liquid and 20 minutes in still air at +140°C

This graph assumes the test has been started at 25°C. You can extend the exposure time by cooling of freezing the data logger prior to use.

A software tool to calculate the exposure time is available for download from {here}

SL130T Exposure Chart

 


Specifications @ 25°C
SL130T
Power
Internal Battery
Battery Life
5 Years Typical
Temperature Range

-30°C to +140°C
(Time limited above +85°C)

Accuracy

±0.6°C ±0.1% of reading ± 0.06°C

Resolution
0.06°C (12 Bit)
Response Time
4 Seconds in stirred liquid
Number of Readings
8192
Sample Rate
2 seconds to 24 hours
Delayed Start
Yes
Software Alarms
Yes
Material
PTFE - Fully encapsulated electronics
Warranty
1 Year
Dimensions (LxWxH)
45mm diameter x 126mm
Weight
240 grams
Download Software
Online Datasheet
View The Online Datasheet
Download Exposure Calculator

Order Codes

SL130 Data Logger:
SL130T
Infra Red Reader:
SL120R-RS232

 

 

 

Home | Link To Signatrol | Support | Partners | Buy Signatrol Products | Contact Us | Applications | Calibration Services | Terms & Conditions
Registered Office: Signatrol Ltd, Mythe Barns Business Centre, Mythe Road, Tewkesbury, Glos, GL20 6EA, United Kingdom
Telephone: +44 (0)1684 299 399 Fax: +44 (0)1684 299 375 Email: sales@signatrol.com Web: www.signatrol.com Company Registration Number: 04973283