Automatic Steriliser / Autoclave Validation Tool

A quick and easy method of validating Bench-Top autoclaves to meet the requirements of Health Technical Memorandum 01-05: ‘Decontamination in primary care dental practices’ for best practice

• Maintain Best Practice
• Speed up Validations, need to stand over!
• Independently verified
• See performance at a glance
• Create permanent inviolate record
• Re-use up to 300 times
• Confirmation to EN13060 & HTM 01-05.

Signatrol ltd. has introduced a new quick response, low cost temperature data logger specifically designed to meet the daily requirements of bench-top autoclave validation.

The kit comprises a SL55T-A data-logger, an anodised aluminium enclosure and a stainless steel metal frame.

The data logger is configured from a PC running the bespoke TempIT software and is then inserted in the enclosure. The whole assembly is then placed inside the autoclave and a validation cycle performed. At the end of the cycle the logger is retrieved and connected to the PC where the temperature vs time record can be immediately displayed both graphically and in tabular format. The readings are stored in encrypted form that cannot be altered by ordinary means and therefore forms a permanent inviolate record. Markers on the graph can easily be positioned at the start and end of the sterilisation temperature (normally 134°C) and the time over this temperature can easily be read off and the software will automatically indicate if the measured cycle passes or fails the test.

What you get in the Kit

• SL55T-A: Data-logger with calibration certificate traceable to National Standards by reference to equipment calibrated by a UKAS certified laboratory'
• SL50-INTERFACE_USB: Cable to connect the logger to the USB port of a PC computer
• SL50-ACC10: Special steam resistant fast response enclosure
• SL50-ACC11: Support Frame to ensure the logger is suspended clear of any objects that might effect the cycle response
• TempIT-Pro configuration and analysis software