The SL51T is a self contained single channel, button data logger with the ability to record up to 2,048 temperature points. They operate over the temperature ranges of -40°C to +85°C with ±1.0°C typical accuracy. The button data loggers themselves are very small (about the same size as a watch battery) which enables them to be inserted into small items and packages.
The SL50R Button Reader™ (available separately) interfaces to the USB port of a PC and is totally compatible with the user friendly, TempIT-Lite operating software which enables the logger to be set up and the data read and displayed in graphical format. Data can be stored and retrieved at a later time.
Although not essential, the software can be up-graded to TempIT-Pro which provides various additional features such as data table view, export data to spreadsheet, and automated MKT, F0, A0 and PU calculations etc. If needed, purchase TempIT-Pro from the related products on the right.
The SL51T is a member of the SL50 series, each model having specific advantages:
SL51T - Lowest cost, -40°C to +85°C measuring with ±1.0°C Accuracy
SL51T-A - Identical to the SL51T but supplied with three point calibration certificate
SL52T - Larger memory and faster sample rates. ±0.5°C Accuracy
SL52T-A - Identical to the SL52T but supplied with three point calibration certificate
SL53T - High temperature 0°C to +125°C
SL53T-A - Improved accuracy SL53T (±0.2°C from +80°C to +125°C) supplied with calibration certificate
SL54TH - Temperature & relative humidity
SL54TH-A - Improved relative humidity accuracy
SL55T - Highest temperature +15°C to +140°C
SL55T-A - Improved accuracy of ±0.5°C from +80°C to +140°C. Supplied with calibration certificate
The SL52T, SL53T, SL55T and SL55T-A also have a 'start when alarm' function which inhibits data logging until the data logger has been in an alarm condition. Ideal for temperature related fault finding.
 |
The SL52T, SL53T, SL55T and SL55T-A also have a 'start when alarm' function which inhibits data logging until the data logger has been in an alarm condition. Ideal for temperature related fault finding.
Starter kits are available for all models. The Starter kits contain up to five data logging buttons, the communication interface, a single plastic holder and a copy of the TempIT-Pro software - offering good savings if all items were purchased separately. All SL50 series data loggers and starter kits are available to purchase online by clicking on the relevant 'cart' button to the right.
|
All SL50 series data loggers are supplied calibrated but if you require a UKAS traceable certificate of calibration at temperatures that you specify,
you can purchase this from here.
Product Specifications
| Specifications |
SL51T
|
| Power |
Internal Battery
|
| Battery Life |
|
| Temperature Range |
-40°C to +85°C
|
| Accuracy |
±1°C from -30°C to +70°C
±1.3°C outside of this range
|
| Resolution |
0.5°C (8 Bit)
|
| Number of Readings |
2048
|
| IP Rating |
Water Resistant
|
| Sample Rate |
1 minute to 255 minutes
|
| Delayed Start |
Yes, up to 45 days, 1 minute resolution
|
| Software Alarms |
Yes
|
| Material |
305 Stainless Steel (data logger)
|
| Warranty |
1 Year
|
| Dimensions (LxWxH) |
65mm x 57mm x 13mm
|
| Online Datasheet |
|
Online Instruction Sheet
|
 |
| Accessories |
Click Here |
| Enclosure Datasheet |
|
| TempIT Software |
|