SL50-ACC10 Fast Thermal Response Enclosure

  • £51.00Ex.VAT

SL50-ACC10 Fast Thermal Response Enclosure

Constructed from blue anodised aluminium, the SL50-ACC10 is a fast response enclosure for use with all SL50 series temperature data loggers. An FDA food grade approved O-Ring seals the front face of the data logger whilst allowing fluids to flow over the main body and therefore improve response times. The stainless steel support frame is also included.

Our TempIT-Pro software features a special response time correction algorithm whereby the speed of response of the logger inside the SL-ACC10 enclosure (required to protect the logger from pressurised steam or liquids) is electronically compensated for, thus removing the response time errors for the overall system response curves.

Diameter 21.0mm, Height 24mm
35mm x 35mm x 35mm high when used with support frame
Weight: 4.7g excluding data logger

Pressure Rating: ±3.5 Bar

Specification

Operating Temperature Range -15°C to +140°C
Dimensions Diameter 21.0mm, Height 24mm
35mm x 35mm x 35mm high when used with support frame
Weight 4.7g excluding data logger
Protection Up to 3.5 Bar or 35m submersion
Response Time In Water

63% Step Change: 28 Seconds

10% to 90% Step Change: 60 Seconds

Response Time In Air

63% Step Change: 117 Seconds

10% to 90% Step Change: 238 Seconds

O-Ring Black, Ethylene Propylene Rubber EPDM, NSF 61, KTW, WRAS, OVGM approved, FDA compliant

Download




You may also like


316 stainless steel enclosure that protects the SL50 series data loggers in harsh environments or where the logger is submerged in liquid at depths up to 100m

A lower cost alternative to the SL-ACC01. The SL-ACC03 is constructed from Polyphenylene Sulphide (PPS Ryton) for use at depths up to 1m

Two part silicone enclosure to protect all SL50 series data loggers. Available in packs of five or ten

Small temperature data logger that measures from +15°C to +140°C with an accuracy of ±0.2°C. Ideal for use in autoclaves etc.