SL50-ACC06 Silicone Enclosure (Sinking)

  • £15.00Ex.VAT
  • £28.00Ex.VAT

SL50-ACC06 Silicone Protective Enclosure

The lowest cost waterproof enclosure for the SL50 series data loggers available in either packs of five or packs of ten.

The SL-ACC06 is constructed from neutral coloured silicone. This produces a lightweight, two part enclosure that protects the data logger at pressures up to 0.5 Bar or depths of 5m.

The maximum operating temperature is well in excess of the +140°C maximum operating temperature of the SL55T temperature data loggers.

The enclosure may be reused many times but the actual number of times depends upon many factors such as the temperature, the liquid type and the duration. Each time before use carefully inspect the cap for signs of damage and if in doubt discard.

Diameter 22.5mm, Length 25.0mm Weight: 5g excluding data logger 

Please note, this item is not suitable for use in vacuum applications or in silicone oil. Please use SL50-ACC01SL50-ACC01


Operating Temperature Range -15°C to +140°C
Dimensions Diameter 22.5mm, Length 25.0mm
Weight 5g excluding data logger
Protection Up to 0.5 Bar or 5m submersion
Response Time In Water

63% Step Change: 90 Seconds

10% to 90% Step Change: 243 Seconds

Response Time In Air

63% Step Change: 270 Seconds

10% to 90% Step Change: 545 Seconds


You may also like

A coloured waterproof enclosure with blue handle for all SL50 series data loggers. Supplied in packs of five or ten

316 stainless steel enclosure that protects the SL50 series data loggers in harsh environments or where the logger is submerged in liquid at depths up to 100m

A lower cost alternative to the SL-ACC01. The SL-ACC03 is constructed from Polyphenylene Sulphide (PPS Ryton) for use at depths up to 1m

Blue anodised aluminium, fast response enclosure for use with all SL50 series data logger. Suitable for use in autoclaves & pasteurisers