SPYDAQ-1000 Base Station With USB

This product is not available for online purchase.
Please use the 'Get a quote' button below if you would like to discuss your needs.

SpYdaq 1000 Base Station

SpYdaq base station connected to a local computer via USB.

At the heart of the spYdaq system is the base station. This receives the signals from the transmitters, checks the data is correct and in the case of this spYdaq base station, it sends the readings to a computer via the USB port. As with all spYdaq base stations, the SPYDAQ-1000 will accept signals from up to 16 transmitters. The base station has LED indicators along the front panel that flash either red or green depending on alarm state. There is also an audible alarm to attract attention. The LCD display on the top of the base station shows received values as well as system information. On the rear of the base station is a push button to cycle through the various menu options, alarm relay that can be connected to a light pole, klaxon or similar device. There is a USB port for connection to a computer that would run our SPYMONITOR-LOCAL software. There is also the BNC connector for the two receiving antennas. These are used for our antenna diversity algorithm that selects the aerial with the strongest signal, therefore improving reliability of the radio signal. A mains power supply is also included.

This base station should be used if the system is to run locally on a Windows computer.

If the connected computer has an Internet connection, the SPYMONITOR-LOCAL software can be configured to send reports via email on a daily, weekly or monthly basis. There is also the option to send email or SMS / text messages in the event of an alarm.

Spymonitor Graph

Specification

Power Battery / Mains: 10-28VDC Supplied with 100/230VAC mains adaptor
Ports USB. Used for configuration via SPYCONFIG and data analysis using SPYMONITOR-LOCAL
Alarms Audio, LED, Contact Closure / Relay (1A @ 24VDC)
LED Indicators 1 per transmitter indicating transmission received and / or alarm condition
LCD Display 4 line, 20 character displaying system and alarm data as well as real time values
Antenna Diversity Selects the strongest signal from 2 antennas
Receiver Frequency 433MHz split into 4 sub bands. 868MHz and 915MHz available for use in Europe / United States
Dimensions 240mm x 185mm x 45mm Excluding Aerials
240mm x 185mm x 150mm Including Aerials 
Operating Temperature Range -10°C to +50°C
Material ABS
Warranty 3 Years



You may also like


SpYdaq base station with cloud connectivity. This base station receives the signals from the transmitters and sends them to our secure servers

Wall mounted, wireless temperature and relative humidity sensor for the SpYdaq wireless data logger system.

Wireless temperature transmitter with the temperature sensor on a 1m flying lead.

Wireless transmitter that can be used with dual sensors to monitor two separate locations within 1.5m of the transmitter