SPYDAQ-1007-P Wireless Temperature Transmitter

This product is not available for online purchase.
Please use the 'Get a quote' button below if you would like to discuss your needs.

SPYDAQ-1007-P Wireless Temperature Sensor

Wireless temperature sensor with an internal temperature sensor to measure ambient temperature and a flying lead temperature sensor with 1m cable. The enclosure is IP65 rated and an IP65 rated gland is included. The transmitter is battery powered for up to six years.


Power Internal Lithium Primary cell. 3.7V AA Size
Battery Life 6 yrs life minimum @ 10 min transmission rate
Measuring Range

-30°C to +75°C (-22°F to +167°F) for the internal temperature

-40°C to +200°C (-40°F to +392°F) for the flying lead sensor


±0.5°C from 0°C to +50°C. ±1°C outside of this range for the internal sensor

±0.3°C ±0.35°% of reading for the immersion sensor

Transmission Rate Switch Selectable: 20 secs, 1 min, 10 min or 30 min
Transmit Power 10mW
Transmission Range Typically 400m line of sight.
Transmission Frequency  433MHz
Outdoor Use Yes - IP65 Rated
Material ABS

Enclosure: 108mm Diameter x 60mm Deep.

Flying Lead Sensor: 50mm Long x 10mm square sheath with 36mm radius on one edge to assist with pipe mounting. Supplied with 1m flying lead

Antenna: 172mm Long

Warranty 3 Years
Approvals / Standards EN 12830

You may also like

Wireless temperature sensor with a flat, 1.5m flying lead to easily pass through door seals.

Wireless transmitter that can be used with dual sensors to monitor two separate locations within 1.5m of the transmitter

Wireless temperature transmitter with the temperature sensor on a 1m flying lead.

Similar to the SPYDAQ-1003-T but with a much faster thermal response. Ideal for mounting inside or out.