Wireless Temperature And Relative Humidity Sensor

This product is not available for online purchase.
Please use the 'Get a quote' button below if you would like to discuss your needs.

SPYDAQ-1009-TH Wireless Temperature & Humidity Sensor

Wireless transmitter with an internal temperature sensor to measure ambient temperature and a flying lead temperature and relative humidity sensor with 1.5m cable.

The enclosure is IP65 rated and an IP65 rated gland is included. The transmitter is battery powered for up to six years.


Power Internal Lithium Primary cell. 3.7V AA Size
Battery Life 6 yrs life minimum @ 10 min transmission rate
Measuring Range

-30°C to +75°C (-22°F to +167°F)

0 to 100%RH


±0.5°C from 0°C to +50°C. ±1°C outside of this range


Transmission Rate Selectable: 20 secs, 1 min, 10 min or 30 min (10 minute recommended)
Transmit Power 10mW
Transmission Range Typically 400m line of sight.
Transmission Frequency  433MHz
Outdoor Use No
Material ABS

Enclosure: 108mm Diameter x 60mm Deep.

Sensor: 20mm Diameter x 187mm Long with 1.5m cable

Antenna: 172mm Long

Warranty 3 Years

You may also like

Wall mounted, wireless temperature and relative humidity sensor for the Spydaq wireless data logger system.

Temperature and relative humidity transmitter in a rugged industrial enclosure with 187mm long duct sensor.

Wireless temperature and relative humidity transmitter in a rugged industrial enclosure.

Similar to the SPYDAQ-1003-T but with a much faster thermal response. Ideal for mounting inside or out.