SPYDAQ-1003-T Wireless Temperature Sensor

This product is not available for online purchase.
Please use the 'Get a quote' button below if you would like to discuss your needs.

SPYDAQ-1003-T Wireless Temperature Sensor

Wireless temperature sensor in a rugged industrial enclosure. With the temperature sensor mounted on the internal PCB, this wireless temperature sensor is ideal for monitoring temperature in areas where drafts are possible. The thermal response is slowed down due to the sensor being mounted internally. The enclosure is IP65 rated and the transmitter is battery powered for up to six years.


Power Internal Lithium Primary cell. 3.7V AA Size
Battery Life 6 yrs life minimum @ 10 min transmission rate
Measuring Range

-30°C to +75°C (-22°F to +167°F)


±0.5°C from 0°C to +50°C. ±1°C outside of this range

Transmission Rate Selectable: 20 secs, 1 min, 10 min or 30 min (10 minute recommended)
Transmit Power 10mW
Transmission Range Typically 400m line of sight.
Transmission Frequency  433MHz
Outdoor Use Yes - IP65 Rated
Material ABS

Enclosure: 108mm Diameter x 60mm Deep.

Antenna: 172mm Long

Warranty 3 Years
Approvals / Standards EN 12830

You may also like

Internal wall mounted wireless temperature transmitter with on board temperature sensor. This sensor is housed in a modern, attractive enclosure

Similar to the SPYDAQ-1003-T but with a much faster thermal response. Ideal for mounting inside or out.

Wireless temperature sensor in a rugged industrial enclosure with 250mm x 6mm immersion sensor and 1/4" BSP compression gland

Wireless temperature transmitter with the temperature sensor on a 1m flying lead.