SPYDAQ-1010 Wireless Dual Temperature Sensor

This product is not available for online purchase.
Please use the 'Get a quote' button below if you would like to discuss your needs.

SPYDAQ-1010 Wireless Dual Temperature Sensor

SPYDAQ-1010 dual temperature sensor
Wireless transmitter with the option to measure two external temperatures with one transmitter. 

Please note, this is for the transmitter only, the sensors are purchased separately (see below). 

The enclosure is IP65 rated and an IP65 rated gland is included. The transmitter is battery powered for up to six years.

Specification

Power Internal Lithium Primary cell. 3.7V AA Size
Battery Life 6 yrs life minimum @ 10 min transmission rate
Measuring Range

-50°C to +90°C (-40°F to +194°F) - Channel A

-50°C to +90°C (-58°F to +194°F) - Channel B (If used with SPYDAQ-ACC-08-01)
-80°C to +90°C (-112°F to +194°F) - Channel B (if used with SPYDAQ-ACC-08-02)

Accuracy

Dependent up on sensor used. Sensors supplied separately

Transmission Rate Selectable: 20 secs, 1 min, 10 min or 30 min (10 minute recommended)
Transmit Power 10mW
Transmission Range Typically 400m line of sight.
Transmission Frequency  433MHz
Outdoor Use Yes - IP65 Rated
Material ABS
Dimensions

Enclosure: 108mm Diameter x 60mm Deep.

Antenna: 172mm Long

Warranty 3 Years

Download




You may also like


Wireless temperature transmitter with the temperature sensor on a 1m flying lead.

Dual temperature sensor for use with the SPYDAQ-1010 transmitter. Two sensors, 75mm long x 6mm diameter on 1.5m flying leads

Dual temperature sensor for use with the SPYDAQ-1010 transmitter. Two sensors on 1.5m flying leads

Wireless temperature sensor with a flat, 1.5m flying lead to easily pass through door seals.